Small sewage lifting unit (floor-mounted installation)
Sewage lifting unit ready for connection for limited use (in direct connection behind a stand-alone toilet) with macerator for the disposal of the sewage from an individual toilet in addition to a hand washbasin, a shower or a bidet, the wastewater/sewage of which cannot be conveyed to the sewer system via natural slope and/or for the disposal of wastewater that accumulates below the backflow level. Compliance with DIN EN 12050-3 and DIN 1986‐100 is required. We recommend using Wilo-DrainLift S to XXL as well as FTS series products when connecting several or different drainage fixtures.
Max. pressure pipe lengths DN 32, for optimal operation, the first section of the pressure pipe should be positioned vertically and then the rest continued horizontally if at all possible (2 bends of 90° and a built-in non-return valve are taken into account).
Special features/product advantages
Automatically operating small lifting unit with macerator, all switchgears and control units required, built-in non-return valve, active carbon filter, flexible pressure port and connection options for one toilet, two additional drainage fixtures and one ventilation pipe. The DrainLift KH 32 small lifting unit is connected directly to a toilet basin with a horizontal connecting piece. The connections for additional drainage fixtures and for the pressure pipe are at the back of the system and can be guide out either to the right or to the left. Odour-free exhaust ventilation into the installation room is implemented by means of an integrated active carbon filter or a ventilation pipe over the roof.
Connection pressure side:
Scope of delivery
Lifting unit ready for connection with macerator, active carbon filter, flexible pressure port and installation and operating instructions.